The Cross Lever is Paul Components most versatile bike brake lever,
designed to work with any kind of brake, and is both a Short Pull and a
Long Pull lever depending upon the position of the adjustable pivot. The
levers come with their pivot pins in the hole closest to the handlebar
for short pull brakes such as road calipers, center pull cantilever
brakes, and road mechanical disk brakes. Move the pivot pin to the outer
hole and the levers are compatible with long pull brakes like Paul
Motolites, V-Brakes and mountain mechanical disk brakes.
The Cross Lever is an in-line brake
lever made for use on the flat upper section of drop handlebars. By
routing your existing brake cable and housing from your drop levers
through the Cross Lever, you can have two sets of brake levers that
allow you to control your speed from multiple hand positions.
The Cross Lever can also be used on its
own by letting the head of brake cable sit in the recess for the housing
on the outside of the lever.
The Cross Lever fits onto the thicker
stem clamp area of bicycle handlebars, and the hinged clamp lets you
install without needing to strip your bar tape. The barrel
adjuster makes it easy to fine tune your cable tension.
- Installation instructions
American made in USA (U.S.A.)