AVT, we are honored to offer you this Chris King® hub as an
authorized Chris King® dealer.
This hub features ceramic
bearings, built to the same exacting standards as the classic and
time-tested stainless steel ball bearing model. The corrosion resistance of
ceramic ball bearings combined with Chris King's sealing system provides greater
flexibility with greasing options. The ceramic bearing ISO Disc hubs are made
with a very small amount of silicone-based lube resulting in a system with very
This is a downhill and freeride specific
hub, designed for downhill bikes from Santa Cruz,
Trek, Norco, and others. This hub features a wider hub body for better load
distribution. It also offers easy
axle interchangeability for cross compatibility between Chris King 150mm (2013
or newer) and
The 157x12mm ISO disc hub brings
the proven reliability and performance of Chris King® to your heavy duty
freeride or downhill bike. It features a 157mm one piece axle with a
constant 19.5 mm diameter through the bearings to the dropouts.
Chris King® hubs are truly
engineering masterpieces, and this 157x12mm ISO hub is no exception.
Bearing preload can be adjusted without removing your wheel using just a 2.5
hex-head wrench to fine-tune the adjusting clamp on the non-drive side. Thorough
service can be performed on your hub bearings using just a 2.5 hex wrench
and penknife. And the
Chris King® Hub Service Tool allows for full hub and driveshell disassembly
and reassembly for a complete and thorough service.
This ISO Disc hub fits all ISO
compliant disc brake rotors with no adapter needed. Most modern brake
systems are ISO compliant, so you can save significant weight and give your bike
a nice clean look at the same time.
Chris King® rear hubs are the only hubs that
use their patented RingDrive engagement mechanism. Unlike traditional hubs that
have relatively few engagement points, the Chris King® RingDrive engagement
mechanism uses 72
teeth on each drive ring, making it engage over 3
times faster than a typical 24 tooth pawl-type freehub. The unique RingDrive
engagement mechanism provides you with instant, positive forward movement that no
other hub can match. When you start out or go for a surprise attack,
you won't waste any of your precious power moving forward. This hub is
super strong too! Chris King® has found that it has a handling torque
load of over 800ft/lbs (1085 Newton meters). That's over three times more than
most other high end hubs that Chris King® has tested.
This Chris King® 157x12mm ISO Disc
hub comes standard with an aluminum drive shell. For extra toughness, add
Stainless Steel drive shell...it adds only 48 grams.
are an authorized dealer, you also get a full 5 year worry-free warranty
no matter where in the world you are.
Match this rear hub up with a
Chris King® ISO Disc
hub for the most awesome hub set available. Like a fine watch, the
meticulous craftsmanship of these hubs makes them a precision component that you
will be proud to own for years to come.
American made in USA (U.S.A.)