AVT, we are honored to offer you this Chris King® hub as an
authorized Chris King® dealer.
Note: This Generation 2 150x10mm ISO Disc hub
does not have any parts that are compatible with 150x10mm ISO Disc
hubs from 2012 or older.
This ISO 150mm disc hub brings
the proven reliability and performance of Chris King® to your heavy duty
freeride or downhill bike. It features a 150mm one piece axle with a
constant 19.5 mm diameter through the bearings to the dropouts.
So you're a tough rider?
No problem, this 150mm ISO disc hub is built to handle it. And it's not any
kind of "new" hub, it's another great hub from Chris King® that includes that
same performance, durability, and reliability that you've come to expect from
Chris King® hubs are truly
engineering masterpieces, and this 150mm ISO hub is no exception.
Responsively light at 336 grams, super strong, and completely user serviceable.
Bearing preload can be adjusted without removing your wheel using just a 2.5
hex-head wrench to fine-tune the adjusting clamp on the non-drive side. Thorough
service can be performed on your hub bearings using just a 2.5 hex wrench
and penknife. And the
Chris King® Hub Service Tool allows for full hub and driveshell disassembly
and reassembly for a complete and thorough service.
This ISO Disc hub fits all ISO
compliant disc brake rotors with no adapter needed. Most modern brake
systems are ISO compliant, so you can save significant weight and give your bike
a nice clean look at the same time.
Chris King® rear hubs are the only hubs that
use their patented RingDrive engagement mechanism. Unlike traditional hubs that
have relatively few engagement points, the Chris King® RingDrive™ engagement
mechanism uses 72
teeth on each drive ring, making it engage over 3
times faster than a typical 24 tooth pawl-type freehub. The unique RingDrive
engagement mechanism provides you with instant, positive forward movement that no
other hub can match. When you start out or go for a surprise attack,
you won't waste any of your precious power moving forward. This hub is
super strong too! Chris King® has found that it has a handling torque
load of over 800ft/lbs (1085 Newton meters). That's over three times more than
most other high end hubs that Chris King® has tested.
There's no doubt about
it... the Chris King® patented RingDrive engagement mechanism is the heart of
every Chris King® rear hub, and it's just one of the precision features that
makes it the best hub you can possibly buy. The bearings are special too, time tested
and proven to be the most reliable hub bearings available. This hub is super
strong too! Chris King® has found that it has a handling torque load of
over 800ft/lbs (1085 Newton meters). That's over three times more than most
other high end hubs that Chris King® has tested.
This Chris King® 150mm ISO Disc
hub comes standard with an aluminum drive shell. For extra toughness, add
Stainless Steel drive shell...it adds only 48 grams.
are an authorized dealer, you also get a full 5 year worry-free warranty
no matter where in the world you are.
Match this rear hub up with a
Chris King® ISO Disc
hub for the most awesome hub set available. Like a fine watch, the
meticulous craftsmanship of these hubs makes them a precision component that you
will be proud to own for years to come.
(GOLD shown above -available in 9 colors)
American made in USA (U.S.A.)