0

Your Cart is Empty

Overview

Italian bottom bracket shells are typically only found on Italian bikes these days; they measure 70mm wide and have a 35mm inner diameter.

This package has the parts to install your 24/22mm spindle crank into an ITA bb shell. They consist of bearings pressed into threaded cups, which are then threaded into the frame. Those bearings comprise either CeramicSpeed Standard or Coated Bearings. Super round, super smooth CeramicSpeed balls rotate in hardened-steel races in both. The Coated version has a metallic coating laid onto the races, making it even smoother and harder, resulting in longer life and lower drag.

In The Box

  • 2 threaded cups with bearings installed.
  • 2 dust covers.
  • 1mm spacer
  • 0.5mm spacer.
  • GXP wave washer.
  • Spacer tube.
  • All Round Grease.
  • Sticker sheet.

Tech Data

The bearings come installed into cups. A sleeve is included to further seal the system from the elements and from rubbing on internal cables. The cups mate with 24/22mm thru-axle spindles.

The Standard Bearings have only 0.3-.04 watts of frictional drag per set, an average drag reduction of 75% compared to stock bottom brackets. This is the result of superior design including hardened-steel races, and ceramic balls that are 100% smoother and 15% harder than the ceramic competition. They also last 3x longer.

Coated Bearings last even longer and feature even lower drag. Life is boosted by 60% and drag plummets by 50% compared to our Standard.

All Round Grease is used in the bearings. It can be replaced for lower drag TT and Track Grease, or higher durability LongLife Grease, which adds a bit of drag but stays in when riding through messy conditions.


Installation

Installation of ITA for SRAM GXP Road

If you don't have any experience installing bottom brackets and bearings, we recommend that you have your local bike shop fit your new bearings.



Installation of SRAM GXP crank on CeramicSpeed Bottom Brackets



Maintenance

We recommend that you follow our instructions on how to maintain your CeramicSpeed Bottom Brackets to achieve the lowest friction and the best longevity.



Additional Documents

BB Socket Tool Compatibility Overview (.pdf)

View Bottom Bracket Matrix (.pdf)

101335

Ceramicspeed ITA Bottom Bracket for SRAM GXP Road

Available from stock in 3-5 days unless specified below.

Most non-stock products take approx 2-3 weeks from time of order to shipping.

Please contact us for any CeramicSpeed products you don't see listed on our site.

Overview

Italian bottom bracket shells are typically only found on Italian bikes these days; they measure 70mm wide and have a 35mm inner diameter.

This package has the parts to install your 24/22mm spindle crank into an ITA bb shell. They consist of bearings pressed into threaded cups, which are then threaded into the frame. Those bearings comprise either CeramicSpeed Standard or Coated Bearings. Super round, super smooth CeramicSpeed balls rotate in hardened-steel races in both. The Coated version has a metallic coating laid onto the races, making it even smoother and harder, resulting in longer life and lower drag.

In The Box

  • 2 threaded cups with bearings installed.
  • 2 dust covers.
  • 1mm spacer
  • 0.5mm spacer.
  • GXP wave washer.
  • Spacer tube.
  • All Round Grease.
  • Sticker sheet.

Tech Data

The bearings come installed into cups. A sleeve is included to further seal the system from the elements and from rubbing on internal cables. The cups mate with 24/22mm thru-axle spindles.

The Standard Bearings have only 0.3-.04 watts of frictional drag per set, an average drag reduction of 75% compared to stock bottom brackets. This is the result of superior design including hardened-steel races, and ceramic balls that are 100% smoother and 15% harder than the ceramic competition. They also last 3x longer.

Coated Bearings last even longer and feature even lower drag. Life is boosted by 60% and drag plummets by 50% compared to our Standard.

All Round Grease is used in the bearings. It can be replaced for lower drag TT and Track Grease, or higher durability LongLife Grease, which adds a bit of drag but stays in when riding through messy conditions.


Installation

Installation of ITA for SRAM GXP Road

If you don't have any experience installing bottom brackets and bearings, we recommend that you have your local bike shop fit your new bearings.



Installation of SRAM GXP crank on CeramicSpeed Bottom Brackets



Maintenance

We recommend that you follow our instructions on how to maintain your CeramicSpeed Bottom Brackets to achieve the lowest friction and the best longevity.



Additional Documents

BB Socket Tool Compatibility Overview (.pdf)

View Bottom Bracket Matrix (.pdf)

  • AVT.Bike is an authorized CeramicSpeed dealer. We carry stock of the most common CeramicSpeed bottom brackets and pulley wheels in Black.
  • Most CeramicSpeed products are also available in Red, plus a coated version. Please contact us for availability and ordering of these products.
  • The coated version contains a metallic layer, which is 75% harder than the hardened steel races. The coating is applied in a very thin and even layer of 3 microns (0,003 mm) on the entire surface of the bearing race. Both the inside and the outside are treated to achieve optimal results.
  • If you have any technical questions at all on CeramicSpeed products please contact us and we'll be pleased to help you out!
  • All CeramicSpeed products are responsibly manufactured in Denmark.
Available For Pre Order.
Ships In Approx 2 Weeks.