0

Your Cart is Empty

Overview

PF30 road bottom bracket shells are 68mm wide like BB30, but have a greater diameter, 46mm, so that bearings in cups can fit inside the shell. This kit contains all the parts you need to install a Quarq or SRAM 24/22mm spindle crank in a BB30 road or cyclocross bike.

The bundle comes with two cups and CeramicSpeed bearings installed. There are two choices. Standard and Coated. The both possess super smooth CeramicSpeed balls fitted in hardened-steel races. The Coated have an additional feature: a 3-micron thick metallic layer over the races. This addition makes the races smoother and harder, lowering drag and increasing life.

In The Box

  • 2 cups with bearings installed.
  • 2 dust covers.
  • GXP wave washer.
  • Spacer tube.
  • CeramicSpeed All Round Grease.
  • Sticker sheet.

Tech Data

The cups have extended sleeves, are joined via a spacer tube, reducing the likelihood of creaking and increasing the reliability, as well as protecting internal cabling from the 24/22mm crank spindle on SRAM and Quarq cranks.

The Standard Bearings have a friction cost 0.3-.04 watts per set, an average drag reduction of 75% compared to stock bb’s. The result of smart design: hardened-steel races, and ceramic balls that are 100% smoother and 15% harder than even the competition from fellow ceramic bearings. They also last longer.

Coated Bearings feature an even longer service life and feature even lower drag. Life increases by 60% and drag drops by 50% compared to our Standard.

All Round Grease is installed in the bearings. It can be replaced for lower drag TT and Track Grease, or higher durability LongLife Grease, which adds a bit of drag but stays in when riding through messy conditions.


Installation

Installation of PF30 for SRAM GXP

If you don't have any experience installing bottom brackets and bearings, we recommend that you have your local bike shop fit your new bearings.



Installation of SRAM GXP cranks on CeramicSpeed Bottom Brackets



Maintenance

We recommend that you follow our instructions on how to maintain your CeramicSpeed Bottom Brackets to achieve the lowest friction and the best longevity.



Additional Documents

BB Socket Tool Compatibility Overview (.pdf)

View Bottom Bracket Matrix (.pdf)

101395

Ceramicspeed PF30 Bottom Bracket for SRAM GXP

Available from stock in 3-5 days unless specified below.

Most non-stock products take approx 2-3 weeks from time of order to shipping.

Please contact us for any CeramicSpeed products you don't see listed on our site.

Overview

PF30 road bottom bracket shells are 68mm wide like BB30, but have a greater diameter, 46mm, so that bearings in cups can fit inside the shell. This kit contains all the parts you need to install a Quarq or SRAM 24/22mm spindle crank in a BB30 road or cyclocross bike.

The bundle comes with two cups and CeramicSpeed bearings installed. There are two choices. Standard and Coated. The both possess super smooth CeramicSpeed balls fitted in hardened-steel races. The Coated have an additional feature: a 3-micron thick metallic layer over the races. This addition makes the races smoother and harder, lowering drag and increasing life.

In The Box

  • 2 cups with bearings installed.
  • 2 dust covers.
  • GXP wave washer.
  • Spacer tube.
  • CeramicSpeed All Round Grease.
  • Sticker sheet.

Tech Data

The cups have extended sleeves, are joined via a spacer tube, reducing the likelihood of creaking and increasing the reliability, as well as protecting internal cabling from the 24/22mm crank spindle on SRAM and Quarq cranks.

The Standard Bearings have a friction cost 0.3-.04 watts per set, an average drag reduction of 75% compared to stock bb’s. The result of smart design: hardened-steel races, and ceramic balls that are 100% smoother and 15% harder than even the competition from fellow ceramic bearings. They also last longer.

Coated Bearings feature an even longer service life and feature even lower drag. Life increases by 60% and drag drops by 50% compared to our Standard.

All Round Grease is installed in the bearings. It can be replaced for lower drag TT and Track Grease, or higher durability LongLife Grease, which adds a bit of drag but stays in when riding through messy conditions.


Installation

Installation of PF30 for SRAM GXP

If you don't have any experience installing bottom brackets and bearings, we recommend that you have your local bike shop fit your new bearings.



Installation of SRAM GXP cranks on CeramicSpeed Bottom Brackets



Maintenance

We recommend that you follow our instructions on how to maintain your CeramicSpeed Bottom Brackets to achieve the lowest friction and the best longevity.



Additional Documents

BB Socket Tool Compatibility Overview (.pdf)

View Bottom Bracket Matrix (.pdf)

  • AVT.Bike is an authorized CeramicSpeed dealer. We carry stock of the most common CeramicSpeed bottom brackets and pulley wheels in Black.
  • Most CeramicSpeed products are also available in Red, plus a coated version. Please contact us for availability and ordering of these products.
  • The coated version contains a metallic layer, which is 75% harder than the hardened steel races. The coating is applied in a very thin and even layer of 3 microns (0,003 mm) on the entire surface of the bearing race. Both the inside and the outside are treated to achieve optimal results.
  • If you have any technical questions at all on CeramicSpeed products please contact us and we'll be pleased to help you out!
  • All CeramicSpeed products are responsibly manufactured in Denmark.
Available For Pre Order.
Ships In Approx 2 Weeks.