0

Your Cart is Empty

Custom built to order using Chris King, White Industries, Phil Wood or Industry Nine hubs. (Please note ENVE products cannot be shipped outside of the USA).

What's New?
A revolutionary new disc brake specific, aerodynamic, carbon fiber triathlon and time trial wheelset. The SES 7.8 Disc is both aerodynamically and structurally optimized for use with disc brakes.

Who's It For?
Road racers and triathletes on modern disc brake equipped aero road and triathlon bikes will benefit from the SES 7.8 Disc’s reduced drag, light weight, and rim shape optimized for larger volume road tires.

Why Did ENVE Make It?
Many modern road bikes are now equipped with disc brakes and the triathlon superbikes of tomorrow will be as well. The elimination of a braking surface opens up the realm of aerodynamic and structural possibilities. When you don’t have to engineer a flat braking surface that must manage high temperatures from braking you can reduce the rim’s weight, adjust the rim shape for improved aerodynamics and provide better tubeless performance.

Tire Compatibility:
ENVE SES 2.2, 3.4, 5.6, 7.8, 3.4 Disc, 5.6 Disc, 7.8 Disc, SES Rear Disc Wheel – There are no limitations on tire compatibility with these wheel models. Your ENVE SES wheels may be set up and run with inner-tubes and non-tubeless tires or tubeless (TL) and tubeless ready (TLR) tires alike. We recommend the use of a Tubeless (TL) or Tubeless Ready (TLR) 700x25c tire set up tubeless to maximize aerodynamics, rolling resistance, crosswind stability, and your ride experience.

Non-Tubeless Setup (i.e. I want to run inner-tubes) – Each ENVE SES wheelset is delivered with one roll of RED, model specific, ENVE tested and approved tubeless rim tape. This tape should be installed regardless of whether you intend to run your wheels tubeless or not. Do not run cloth or plastic (including ENVE) non-tubeless compatible rim tape or strips. Plastic rim strips and cloth tapes are too thick, bridge the drop-center rim channel, and will make installation and removal of tires extremely difficult. Click here for our tubeless tape installation video.

Cotton and/or Natural Fiber Sidewall Tires – ENVE does NOT RECOMMEND the use of cotton or natural fiber sidewall non-tubeless tires with ENVE SES wheelsets for EVERYDAY USE. These tires are intended for high-performance racing applications only. If you choose to run these tires, please inspect your tires after each ride for cuts, tears, and any signs of abrasion and/or wear in the sidewall and at the location of the rim/tire interface. If any wear and/or damage is identified, replace before riding. Riders who choose to run tires with cotton or natural fiber sidewalls do so at their own risk.

AVT Works ENVE SES 7.8 Wheelset (Disc & Non Disc)

Ready To Ship In: 2-3 Weeks (Handbuilt to order by AVT)
Ships To: Worldwide (some shipping restrictions based on Rim).
Returns: 60 Day Free Returns*

Hub
Spokes
Brake Type
Read Before Ordering

Custom built to order using Chris King, White Industries, Phil Wood or Industry Nine hubs. (Please note ENVE products cannot be shipped outside of the USA).

What's New?
A revolutionary new disc brake specific, aerodynamic, carbon fiber triathlon and time trial wheelset. The SES 7.8 Disc is both aerodynamically and structurally optimized for use with disc brakes.

Who's It For?
Road racers and triathletes on modern disc brake equipped aero road and triathlon bikes will benefit from the SES 7.8 Disc’s reduced drag, light weight, and rim shape optimized for larger volume road tires.

Why Did ENVE Make It?
Many modern road bikes are now equipped with disc brakes and the triathlon superbikes of tomorrow will be as well. The elimination of a braking surface opens up the realm of aerodynamic and structural possibilities. When you don’t have to engineer a flat braking surface that must manage high temperatures from braking you can reduce the rim’s weight, adjust the rim shape for improved aerodynamics and provide better tubeless performance.

Tire Compatibility:
ENVE SES 2.2, 3.4, 5.6, 7.8, 3.4 Disc, 5.6 Disc, 7.8 Disc, SES Rear Disc Wheel – There are no limitations on tire compatibility with these wheel models. Your ENVE SES wheels may be set up and run with inner-tubes and non-tubeless tires or tubeless (TL) and tubeless ready (TLR) tires alike. We recommend the use of a Tubeless (TL) or Tubeless Ready (TLR) 700x25c tire set up tubeless to maximize aerodynamics, rolling resistance, crosswind stability, and your ride experience.

Non-Tubeless Setup (i.e. I want to run inner-tubes) – Each ENVE SES wheelset is delivered with one roll of RED, model specific, ENVE tested and approved tubeless rim tape. This tape should be installed regardless of whether you intend to run your wheels tubeless or not. Do not run cloth or plastic (including ENVE) non-tubeless compatible rim tape or strips. Plastic rim strips and cloth tapes are too thick, bridge the drop-center rim channel, and will make installation and removal of tires extremely difficult. Click here for our tubeless tape installation video.

Cotton and/or Natural Fiber Sidewall Tires – ENVE does NOT RECOMMEND the use of cotton or natural fiber sidewall non-tubeless tires with ENVE SES wheelsets for EVERYDAY USE. These tires are intended for high-performance racing applications only. If you choose to run these tires, please inspect your tires after each ride for cuts, tears, and any signs of abrasion and/or wear in the sidewall and at the location of the rim/tire interface. If any wear and/or damage is identified, replace before riding. Riders who choose to run tires with cotton or natural fiber sidewalls do so at their own risk.

  • AVT Works is our in house wheel building and service dept offering a full range of custom wheel builds and hub servicing.
  • Available with any of the hubs listed on our site including; Chris King, White Industries, Phil Wood, ONYX, Industry Nine and PAUL Components.
  • Available with a wide variety of rims from HED, ENVE, Santa Cruz, Race Face, WTB, Velocity, Praxis, White Industries, Astral, HPLUS Son, BOYD and more with Wheelsmith or SAPIM CX Ray spokes.
  • Please allow 2-3 weeks to build and ship (depending on availability of parts)
  • If you're looking for a hub / rim combination not listed here please contact us.
  • * Custom made products including AVT Works wheelsets can be returned post purchase subject to a 20% re-stocking fee. More info can be found in our returns policy.