0

Your Cart is Empty

April 08, 2019 1 min read

With all of the bottom bracket standards these days, it can be hard to figure out what will work with your bike and crankset, and once you do figure it out, you don't always have a lot of options.  This is where White Industries comes in: with their BSA and T47 bottom brackets, there are options for 24mm (Shimano Hollowtech 2), 28.99mm (Sram DUB), and 30mm spindles, so if you have one of these two common threaded standards, you'll have no trouble getting a quality bottom bracket to fit whatever cranks you have.  On top of that, all of White Industries' BSA bottom brackets are available in their full range of colors! 

From left to right: BSA 24mm, BSA DUB, BSA 30

All White Industries bottom brackets us replaceable Enduro sealed cartridge bearings, complete with an extra seal on the outside (in these photos, that's the orange or blue part, depending on the bearing).  This seal is easy to remove, clean, and lubricate, which means that keeping your bearings in great shape is a cinch.  On top of that, all of the bottom brackets use precisely-sized bearings that match the diameter of the spindle for which they're designed.  Many other manufacturers tend to use bearings that have a plastic inner sleeve where they contact the spindle, and while that seems to work fine, we like the solidity of a metal-on-metal contact that these have.

Here you can see the metal inner race of each bearing.

If you have any questions about compatibility with your frame or crankset, feel free to get in touch



Also in AVT Blog

Buying bike parts in an environmentally responsible way.
Buying bike parts in an environmentally responsible way.

November 02, 2021 2 min read

There seems to be a lot of coverage right now on sustainability and environmental issues both inside and outside of the bike industry so it's worth t...
Read More
De Salvo Bling Build For The Grinduro That Never Was...
De Salvo Bling Build For The Grinduro That Never Was...

October 27, 2021 1 min read

Our neighbor here in Ashland, Mike De Salvo, consistently turns out some of the nicest welded bikes in the business. So when Mike gets asked to produce something for a s...
Read More
Wheel Build Of The Week: ENVE 45 / Chris King R45D Gold.
Wheel Build Of The Week: ENVE 45 / Chris King R45D Gold.

October 18, 2021 1 min read

This week's wheel build of the week is another stunning pair of Gold Chris King R45D hubs laced to ENVE Foundation 45 rims. Made in the same Utah facility as ENVE's...
Read More