0

Your Cart is Empty

Why We Make It

We build bearings, so we build bottom brackets. The humble threaded bottom bracket is often the first part installed on a new frame, and the last one the rider thinks about during the life of the bike, but the bottom bracket has a direct effect on pedaling efficiency (read: speed). This is where you put your power into the bike. Having the absolute best interface between your effort and your bike’s forward momentum makes your ride better. The Threadfit™ 30 is how we make bikes that take 30mm cranks the best they can be.

Why You Want It

ThreadFit™ 30 fits 30mm and DUB spindle cranks in BSA bottom bracket shells.

Our ThreadFit™ 30 bottom bracket is silky smooth and long-lasting thanks to our legendary, angular-contact bearings, both steel and ceramic, the best in the industry. They actually get faster over time as their contact surfaces wear, because we build them to ultra-tight aerospace tolerances, using machined, Delrin-spindle sleeves to create a perfect, and precise fit between cranks and frame. That’s where the low drag  and butter smooth feel come from. 

You want this bottom bracket because it offers super low drag. You want this bottom bracket, because it can be opened, cleaned and repacked for years of faithful service. You want this bottom bracket, because you don’t want to think an awful lot about your bottom bracket.

Our Threadfit™ 30 bottom brackets come in an array of beautifully anodized colors and each one includes a Fit Kit that allows it to be used with a wide selection of road and mountain bike cranks.

The Fit Kit for our ThreadFit™ 30 with 30mm spindle cranks is available here. The Fit Kit for DUB cranks is available here.

  • Engineered, manufactured and assembled in Portland, Oregon USA
  • King Lifetime Warranty
  • Legendary made-in-house bearings
  • Available in 8 beautifully anodized colors
  • A Fit Kit is required for use and included in the purchase price
  • Ceramic bearing upgrade available
  • Uses Chris King bottom bracket cup tool for installation 



Why We Make It

We build bearings, so we build bottom brackets. The humble threaded bottom bracket is often the first part installed on a new frame, and the last one the rider thinks about during the life of the bike, but the bottom bracket has a direct effect on pedaling efficiency (read: speed). This is where you put your power into the bike. Having the absolute best interface between your effort and your bike’s forward momentum makes your ride better. The Threadfit™ 30 is how we make bikes that take 30mm cranks the best they can be.

Why You Want It

ThreadFit™ 30 fits 30mm and DUB spindle cranks in BSA bottom bracket shells.

Our ThreadFit™ 30 bottom bracket is silky smooth and long-lasting thanks to our legendary, angular-contact bearings, both steel and ceramic, the best in the industry. They actually get faster over time as their contact surfaces wear, because we build them to ultra-tight aerospace tolerances, using machined, Delrin-spindle sleeves to create a perfect, and precise fit between cranks and frame. That’s where the low drag  and butter smooth feel come from. 

You want this bottom bracket because it offers super low drag. You want this bottom bracket, because it can be opened, cleaned and repacked for years of faithful service. You want this bottom bracket, because you don’t want to think an awful lot about your bottom bracket.

Our Threadfit™ 30 bottom brackets come in an array of beautifully anodized colors and each one includes a Fit Kit that allows it to be used with a wide selection of road and mountain bike cranks.

The Fit Kit for our ThreadFit™ 30 with 30mm spindle cranks is available here. The Fit Kit for DUB cranks is available here.

  • Engineered, manufactured and assembled in Portland, Oregon USA
  • King Lifetime Warranty
  • Legendary made-in-house bearings
  • Available in 8 beautifully anodized colors
  • A Fit Kit is required for use and included in the purchase price
  • Ceramic bearing upgrade available
  • Uses Chris King bottom bracket cup tool for installation 

ABB1

Chris King Threadfit 30 Bottom Bracket



Color
Black
Silver
Red
Matte Jet
Matte Turquoise
Gold
Midnight
Violet
Matte Mango
Two Tone
Bearing Type



Availability and stock levels vary by color & specification, please check each color below for stock information.

Why We Make It

We build bearings, so we build bottom brackets. The humble threaded bottom bracket is often the first part installed on a new frame, and the last one the rider thinks about during the life of the bike, but the bottom bracket has a direct effect on pedaling efficiency (read: speed). This is where you put your power into the bike. Having the absolute best interface between your effort and your bike’s forward momentum makes your ride better. The Threadfit™ 30 is how we make bikes that take 30mm cranks the best they can be.

Why You Want It

ThreadFit™ 30 fits 30mm and DUB spindle cranks in BSA bottom bracket shells.

Our ThreadFit™ 30 bottom bracket is silky smooth and long-lasting thanks to our legendary, angular-contact bearings, both steel and ceramic, the best in the industry. They actually get faster over time as their contact surfaces wear, because we build them to ultra-tight aerospace tolerances, using machined, Delrin-spindle sleeves to create a perfect, and precise fit between cranks and frame. That’s where the low drag  and butter smooth feel come from. 

You want this bottom bracket because it offers super low drag. You want this bottom bracket, because it can be opened, cleaned and repacked for years of faithful service. You want this bottom bracket, because you don’t want to think an awful lot about your bottom bracket.

Our Threadfit™ 30 bottom brackets come in an array of beautifully anodized colors and each one includes a Fit Kit that allows it to be used with a wide selection of road and mountain bike cranks.

The Fit Kit for our ThreadFit™ 30 with 30mm spindle cranks is available here. The Fit Kit for DUB cranks is available here.

  • Engineered, manufactured and assembled in Portland, Oregon USA
  • King Lifetime Warranty
  • Legendary made-in-house bearings
  • Available in 8 beautifully anodized colors
  • A Fit Kit is required for use and included in the purchase price
  • Ceramic bearing upgrade available
  • Uses Chris King bottom bracket cup tool for installation 
  • AVT.Bike is an authorized Chris King® dealer and proud to carry one of the largest selections of Chris King products available online and shipped anywhere in the world.
  • Chris King components including hubs, headsets and bottom brackets are available in 9 stock colors.
  • LIFETIME Warranty on all Chris King products.
  • Other colors and product options are available depending on stock levels, so if you don't see the color or exact product you are looking for please contact us.
  • If you have any technical questions at all on Chris King products please contact us and we'll be pleased to help you out!
  • All Chris King products are responsibly manufactured in Portland, Oregon, USA.
In Stock & Ready To Ship Within 24 Hours (Monday to Friday)
In Stock & Ready To Ship Within 24 Hours (Monday to Friday)
In Stock & Ready To Ship Within 24 Hours (Monday to Friday)
In Stock & Ready To Ship Within 24 Hours (Monday to Friday)
Available For Pre Order.
Ships In Approx 1 Weeks.
Available For Pre Order.
Ships In Approx 1 Weeks.
In Stock & Ready To Ship Within 24 Hours (Monday to Friday)
Available For Pre Order.
Ships In Approx 1 Weeks.
Available For Pre Order.
Ships In Approx 1 Weeks.
Available For Pre Order.
Ships In Approx 1 Weeks.
In Stock & Ready To Ship Within 24 Hours (Monday to Friday)
Available For Pre Order.
Ships In Approx 1 Weeks.
In Stock & Ready To Ship Within 24 Hours (Monday to Friday)
Available For Pre Order.
Ships In Approx 1 Weeks.
In Stock & Ready To Ship Within 24 Hours (Monday to Friday)
Available For Pre Order.
Ships In Approx 1 Weeks.
In Stock & Ready To Ship Within 24 Hours (Monday to Friday)
Available For Pre Order.
Ships In Approx 1 Weeks.
Available For Pre Order.
Ships In Approx 1 Weeks.
Available For Pre Order.
Ships In Approx 1 Weeks.