0

Your Cart is Empty

** Buying a pair? Use discount code 'KLAMPAIR' when you check out to get 10% off a pair of Klampers **

Three years of development and we think we nailed it!

100% designed, tested and manufactured in house.

PRODUCT STORY

When we set out to build this brake, nearly four years ago, we started with a clean slate. Then we tried all manner of wacky ideas but eventually wound our way back to the tried and true ball bearing in a ramp system. From there we concentrated on the details.

We made the balls bigger for smoothness and increased pad travel. We hardened the steel where the balls contact the ramps. We used three hardened steel pins to locate the pad actuator. Instead of a plastic thrust washer we used a flat needle roller thrust bearing. Then we moved onto the caliper body. This took countless drawing revisions and probably 20 prototypes. We added fangs to the inner backing plate for stiffness, and beefed up the outer caliper body where needed. The pad adjusters went through a similar process. We wanted easy adjust ability but staying power. For that we designed detentes into the circumference, located with spring ball plungers.

We believe this is the best mechanical caliper ever made for a bicycle.

It's available in Long Pull, Short Pull, and Campagnolo pull. We decided not to make rotors. That's a manufacturing process we do not do, and they are readily available. Floating rotors with large buttons (like Hope) might rub against the caliper, but we've had great results with Shimano Ice-Tech, Sram, Avid, and most other rotor brands.

The pads are Kool Stop sintered metallic. As always, allow a couple short rides to bed in the pads. Around the 3rd ride, these brakes really start to BITE! Please note that all of our brakes are sold per wheel. Rotors are not included, however, Kool-Stop sintered metallic pads are included.

048BLACKLP

Paul Components Klamper Disc Caliper

Ready To Ship In: 2 Days (USA), 3-5 Days (International)
Ships To: Worldwide
Returns: 60 Day Free Returns
Made In: Chico, CA, USA

Color
BLACK
SILVER
Polished
BLACK/ORANGE
SILVER/ORANGE
Cable Pull
Brake Mount
Read Before Ordering

** Buying a pair? Use discount code 'KLAMPAIR' when you check out to get 10% off a pair of Klampers **

Three years of development and we think we nailed it!

100% designed, tested and manufactured in house.

PRODUCT STORY

When we set out to build this brake, nearly four years ago, we started with a clean slate. Then we tried all manner of wacky ideas but eventually wound our way back to the tried and true ball bearing in a ramp system. From there we concentrated on the details.

We made the balls bigger for smoothness and increased pad travel. We hardened the steel where the balls contact the ramps. We used three hardened steel pins to locate the pad actuator. Instead of a plastic thrust washer we used a flat needle roller thrust bearing. Then we moved onto the caliper body. This took countless drawing revisions and probably 20 prototypes. We added fangs to the inner backing plate for stiffness, and beefed up the outer caliper body where needed. The pad adjusters went through a similar process. We wanted easy adjust ability but staying power. For that we designed detentes into the circumference, located with spring ball plungers.

We believe this is the best mechanical caliper ever made for a bicycle.

It's available in Long Pull, Short Pull, and Campagnolo pull. We decided not to make rotors. That's a manufacturing process we do not do, and they are readily available. Floating rotors with large buttons (like Hope) might rub against the caliper, but we've had great results with Shimano Ice-Tech, Sram, Avid, and most other rotor brands.

The pads are Kool Stop sintered metallic. As always, allow a couple short rides to bed in the pads. Around the 3rd ride, these brakes really start to BITE! Please note that all of our brakes are sold per wheel. Rotors are not included, however, Kool-Stop sintered metallic pads are included.

  • AVT.Bike is an authorized Paul Components dealer and proud to carry one of the largest selections of Paul Components products available online and shipped anywhere in the world.
  • Paul Components are available in a range of colors which may vary by product so please consult the specific product page for details on available options.
  • Other colors and product options are available depending on stock levels, so if you don't see the color or exact product you are looking for please contact us.
  • We typically ship out Paul Components product in around 2 days (USA order) / 3-5 days (International orders) from placing your order, but in some cases this can take a few days longer due to stock & production schedules.
  • If you have any technical questions at all on Paul Components products please contact us and we'll be pleased to help you out!
  • All Paul Components products are responsibly manufactured in Chico, California, USA.