0

Your Cart is Empty

IS or Post Mount, we’ve got you covered for rotor sizes 140 through 203mm. Mount screws with thread lock already applied come with all adapters. Machined to perfect tolerances here in Chico, California. Instructions about determining size below.

TECHNICAL INFORMATION

  • Material
    Aluminum and Heat Treated Steel
  • Weight
    +0mm IS: 15g
    +20mm IS: 16g
    +40mm IS: 26g
    +20mm Post Mount: 21g
    +40mm Post Mount: 21g
  • Finish
    Anodized
  • Color
    Black or Silver
  • Mount
    IS or Post Mount
  • Torque Spec
    Typically 6-8nm but double check brake and frame/fork manufacturer.

PRODUCT STORY

IS mounts are the type with the mounting screws that install horizontally. We make them in +0, +20 and +40. To figure out what size adapter you need, you’ll have to check and see what size rotor your frame and/or fork were designed for. For example: if your fork was designed to fit a 160mm rotor and you want to run a 180mm rotor, that is a difference of 20mm, and that’s the adapter you would need. Another example would be a frame that was designed to fit a 140mm rotor, where you want to run a 160mm rotor: you would also need a 20mm adapter.

Please don’t call us asking what size adapter you need, we just don’t know what rotor diameter every frame and fork out there were designed for, so you’ll have better luck asking the frame manufacturer themselves, or your local friendly bike shop.

The post mount version works the same as IS, except the caliper mounts to frame or fork directly through the caliper holes, instead of at a 90^ angle.




IS or Post Mount, we’ve got you covered for rotor sizes 140 through 203mm. Mount screws with thread lock already applied come with all adapters. Machined to perfect tolerances here in Chico, California. Instructions about determining size below.

TECHNICAL INFORMATION

  • Material
    Aluminum and Heat Treated Steel
  • Weight
    +0mm IS: 15g
    +20mm IS: 16g
    +40mm IS: 26g
    +20mm Post Mount: 21g
    +40mm Post Mount: 21g
  • Finish
    Anodized
  • Color
    Black or Silver
  • Mount
    IS or Post Mount
  • Torque Spec
    Typically 6-8nm but double check brake and frame/fork manufacturer.

PRODUCT STORY

IS mounts are the type with the mounting screws that install horizontally. We make them in +0, +20 and +40. To figure out what size adapter you need, you’ll have to check and see what size rotor your frame and/or fork were designed for. For example: if your fork was designed to fit a 160mm rotor and you want to run a 180mm rotor, that is a difference of 20mm, and that’s the adapter you would need. Another example would be a frame that was designed to fit a 140mm rotor, where you want to run a 160mm rotor: you would also need a 20mm adapter.

Please don’t call us asking what size adapter you need, we just don’t know what rotor diameter every frame and fork out there were designed for, so you’ll have better luck asking the frame manufacturer themselves, or your local friendly bike shop.

The post mount version works the same as IS, except the caliper mounts to frame or fork directly through the caliper holes, instead of at a 90^ angle.


Paul Components I.S. & Post Mount Disc Adapters



Style
Size
Color
Black
Silver
Pewter
Polished
Purple



Availability and stock levels vary by color & specification, please check each color below for stock information.

IS or Post Mount, we’ve got you covered for rotor sizes 140 through 203mm. Mount screws with thread lock already applied come with all adapters. Machined to perfect tolerances here in Chico, California. Instructions about determining size below.

TECHNICAL INFORMATION

  • Material
    Aluminum and Heat Treated Steel
  • Weight
    +0mm IS: 15g
    +20mm IS: 16g
    +40mm IS: 26g
    +20mm Post Mount: 21g
    +40mm Post Mount: 21g
  • Finish
    Anodized
  • Color
    Black or Silver
  • Mount
    IS or Post Mount
  • Torque Spec
    Typically 6-8nm but double check brake and frame/fork manufacturer.

PRODUCT STORY

IS mounts are the type with the mounting screws that install horizontally. We make them in +0, +20 and +40. To figure out what size adapter you need, you’ll have to check and see what size rotor your frame and/or fork were designed for. For example: if your fork was designed to fit a 160mm rotor and you want to run a 180mm rotor, that is a difference of 20mm, and that’s the adapter you would need. Another example would be a frame that was designed to fit a 140mm rotor, where you want to run a 160mm rotor: you would also need a 20mm adapter.

Please don’t call us asking what size adapter you need, we just don’t know what rotor diameter every frame and fork out there were designed for, so you’ll have better luck asking the frame manufacturer themselves, or your local friendly bike shop.

The post mount version works the same as IS, except the caliper mounts to frame or fork directly through the caliper holes, instead of at a 90^ angle.

  • AVT.Bike is an authorized Paul Components dealer and proud to carry one of the largest selections of Paul Components products available online and shipped anywhere in the world.
  • Paul Components are available in a range of colors which may vary by product so please consult the specific product page for details on available options.
  • Other colors and product options are available depending on stock levels, so if you don't see the color or exact product you are looking for please contact us.
  • If you have any technical questions at all on Paul Components products please contact us and we'll be pleased to help you out!
  • All Paul Components products are responsibly manufactured in Chico, California, USA.
Available For Pre Order.
Ships In Approx 1 Weeks.
Available For Pre Order.
Ships In Approx 1 Weeks.
Available For Pre Order.
Ships In Approx 1 Weeks.
Available For Pre Order.
Ships In Approx 1 Weeks.
Available For Pre Order.
Ships In Approx 1 Weeks.
Available For Pre Order.
Ships In Approx 1 Weeks.
Available For Pre Order.
Ships In Approx 1 Weeks.
Available For Pre Order.
Ships In Approx 1 Weeks.
Available For Pre Order.
Ships In Approx 1 Weeks.
In Stock & Ready To Ship Within 24 Hours (Monday to Friday)
In Stock & Ready To Ship Within 24 Hours (Monday to Friday)
Available For Pre Order.
Ships In Approx 1 Weeks.
Available For Pre Order.
Ships In Approx 1 Weeks.
Available For Pre Order.
Ships In Approx 1 Weeks.
Available For Pre Order.
Ships In Approx 1 Weeks.
Available For Pre Order.
Ships In Approx 1 Weeks.
Available For Pre Order.
Ships In Approx 1 Weeks.
Available For Pre Order.
Ships In Approx 1 Weeks.
Available For Pre Order.
Ships In Approx 1 Weeks.
Available For Pre Order.
Ships In Approx 1 Weeks.
Available For Pre Order.
Ships In Approx 1 Weeks.
Available For Pre Order.
Ships In Approx 1 Weeks.
Available For Pre Order.
Ships In Approx 1 Weeks.
Available For Pre Order.
Ships In Approx 1 Weeks.
Available For Pre Order.
Ships In Approx 1 Weeks.