0

Your Cart is Empty

The Touring Canti is a powerful cantilever brake with a similar design to the Neo-Retro, but with the arms angled upward. This gives the brake a much narrower profile without significantly reducing stopping power.

PRODUCT STORY

The narrower profile of the Touring Canti can be desirable if you’re riding with large panniers or if your current brakes don’t give you enough heel or calf clearance.

The arms of the Touring Canti are machined from lightweight 6061 aluminum. Their T-shaped cross section prevents the brake from flexing too much under load.

The brake pads mount to slots in the arms that allow for vertical positioning. The toe-in and angle can be fine-tuned thanks to the spherical washers on the brake pads’ threaded posts.

Like all of our brakes, the Touring Canti has a sealed pivot mechanism. Rubber seals and a stainless steel bushing keep the brake arms turning smoothly no matter what you’re riding through. The spring tension can be adjusted in both pivots to center the brake and to adjust the strength of the return swing.

The Touring Canti comes with pivots pre-greased and with all necessary hardware.

We recommend running the Touring Canti with a lower straddle wire to maximize stopping power. Having the cable carrier between 1″ inches and 2″ above the tire is a good range.

Please note that all of our brakes are sold per wheel.

TECHNICAL INFORMATION

  • Material
    6061 Aluminum
  • Weight
    99g
  • Finish
    Anodized or Polished
  • Anodized Color
    Black, Purple or Silver
  • Cable Pull
    Short Pull ↓
  • Brake Pads
    Salmon Kool Stop Thinline
  • Additional Information
  • Brake Pivot - Exploded View
  • Exploded Assembly Drawing
    Exploded Assembly Drawing



The Touring Canti is a powerful cantilever brake with a similar design to the Neo-Retro, but with the arms angled upward. This gives the brake a much narrower profile without significantly reducing stopping power.

PRODUCT STORY

The narrower profile of the Touring Canti can be desirable if you’re riding with large panniers or if your current brakes don’t give you enough heel or calf clearance.

The arms of the Touring Canti are machined from lightweight 6061 aluminum. Their T-shaped cross section prevents the brake from flexing too much under load.

The brake pads mount to slots in the arms that allow for vertical positioning. The toe-in and angle can be fine-tuned thanks to the spherical washers on the brake pads’ threaded posts.

Like all of our brakes, the Touring Canti has a sealed pivot mechanism. Rubber seals and a stainless steel bushing keep the brake arms turning smoothly no matter what you’re riding through. The spring tension can be adjusted in both pivots to center the brake and to adjust the strength of the return swing.

The Touring Canti comes with pivots pre-greased and with all necessary hardware.

We recommend running the Touring Canti with a lower straddle wire to maximize stopping power. Having the cable carrier between 1″ inches and 2″ above the tire is a good range.

Please note that all of our brakes are sold per wheel.

TECHNICAL INFORMATION

  • Material
    6061 Aluminum
  • Weight
    99g
  • Finish
    Anodized or Polished
  • Anodized Color
    Black, Purple or Silver
  • Cable Pull
    Short Pull ↓
  • Brake Pads
    Salmon Kool Stop Thinline
  • Additional Information
  • Brake Pivot - Exploded View
  • Exploded Assembly Drawing
    Exploded Assembly Drawing

040BLACK-3

Paul Components Touring Cantilever Brakes



Color
Black
Purple
Silver
Polished
Blue
Pewter



Availability and stock levels vary by color & specification, please check each color below for stock information.

The Touring Canti is a powerful cantilever brake with a similar design to the Neo-Retro, but with the arms angled upward. This gives the brake a much narrower profile without significantly reducing stopping power.

PRODUCT STORY

The narrower profile of the Touring Canti can be desirable if you’re riding with large panniers or if your current brakes don’t give you enough heel or calf clearance.

The arms of the Touring Canti are machined from lightweight 6061 aluminum. Their T-shaped cross section prevents the brake from flexing too much under load.

The brake pads mount to slots in the arms that allow for vertical positioning. The toe-in and angle can be fine-tuned thanks to the spherical washers on the brake pads’ threaded posts.

Like all of our brakes, the Touring Canti has a sealed pivot mechanism. Rubber seals and a stainless steel bushing keep the brake arms turning smoothly no matter what you’re riding through. The spring tension can be adjusted in both pivots to center the brake and to adjust the strength of the return swing.

The Touring Canti comes with pivots pre-greased and with all necessary hardware.

We recommend running the Touring Canti with a lower straddle wire to maximize stopping power. Having the cable carrier between 1″ inches and 2″ above the tire is a good range.

Please note that all of our brakes are sold per wheel.

TECHNICAL INFORMATION

  • Material
    6061 Aluminum
  • Weight
    99g
  • Finish
    Anodized or Polished
  • Anodized Color
    Black, Purple or Silver
  • Cable Pull
    Short Pull ↓
  • Brake Pads
    Salmon Kool Stop Thinline
  • Additional Information
  • Brake Pivot - Exploded View
  • Exploded Assembly Drawing
    Exploded Assembly Drawing
  • AVT.Bike is an authorized Paul Components dealer and proud to carry one of the largest selections of Paul Components products available online and shipped anywhere in the world.
  • Paul Components are available in a range of colors which may vary by product so please consult the specific product page for details on available options.
  • Other colors and product options are available depending on stock levels, so if you don't see the color or exact product you are looking for please contact us.
  • If you have any technical questions at all on Paul Components products please contact us and we'll be pleased to help you out!
  • All Paul Components products are responsibly manufactured in Chico, California, USA.
In Stock & Ready To Ship Within 24 Hours (Monday to Friday)
In Stock & Ready To Ship Within 24 Hours (Monday to Friday)
In Stock & Ready To Ship Within 24 Hours (Monday to Friday)
Available For Pre Order.
Ships In Approx 1 Weeks.
Available For Pre Order.
Ships In Approx 1 Weeks.