0

Your Cart is Empty

The Racer Medium is basically leaner, meaner and racier than the standard Racer. Due to it's very stiff and short arms it modulates power better than any other brake.

The Racer Medium features a bridge piece that runs between the pivots allowing it to mount to frames with a single brake mounting hole above the tire. An option is given for a shorter recessed bolt to work with modern frames, or a longer non-recessed bolt that works with older frames. Because of this feature, the Racer Medium is a medium (or "standard") reach brake with a range of 47mm to 57mm. The arms allow enough clearance to fit a 45mm fender and a 32mm wide tire, and the brake will not pinch the side of the fender like dual pivot brakes do.

057BLACK

Paul Components Racer Medium Center Mount Brake

Availability and stock levels vary by color & specification, please check each color below for stock information.

Color
BLACK
SILVER
POLISHED
Position
Attachment
The Racer Medium is basically leaner, meaner and racier than the standard Racer. Due to it's very stiff and short arms it modulates power better than any other brake.

The Racer Medium features a bridge piece that runs between the pivots allowing it to mount to frames with a single brake mounting hole above the tire. An option is given for a shorter recessed bolt to work with modern frames, or a longer non-recessed bolt that works with older frames. Because of this feature, the Racer Medium is a medium (or "standard") reach brake with a range of 47mm to 57mm. The arms allow enough clearance to fit a 45mm fender and a 32mm wide tire, and the brake will not pinch the side of the fender like dual pivot brakes do.
  • AVT.Bike is an authorized Paul Components dealer and proud to carry one of the largest selections of Paul Components products available online and shipped anywhere in the world.
  • Paul Components are available in a range of colors which may vary by product so please consult the specific product page for details on available options.
  • Other colors and product options are available depending on stock levels, so if you don't see the color or exact product you are looking for please contact us.
  • If you have any technical questions at all on Paul Components products please contact us and we'll be pleased to help you out!
  • All Paul Components products are responsibly manufactured in Chico, California, USA.